FPVWRA Spec Wing By Wind Catcher RC
Are you new to flying a wing or Spec Class? This wing is for you. Our intention is to provide a Spec Wing that is durable and flies well. It is designed to handle crashes well so while you are learning and hit the dirt you have a better chance of getting back in the air in just a few moments.
The Wind Catcher Spec Wing kit will require assembly.
BUILD INSTRUCTIONS ARE HERE <— CLICK
You will need to supply your own electronics based on your needs or to meet specifications for FPVWRA racing. Regardless of your build, I recommend metal gear servos, preferably 12 gram.
Suggested adhesives are 3M-M77 spray, Gorilla Glue, Starbond CA glue, and Goop or E-6000.
Left and Right wing halves, #1.3 EPP foam
2 – Balsa Elevons
2 – Carbon Fiber Main spars, 3mm x 18″ ROD
2 – Carbon Fiber Leading Edge spars, 10mm x 1mm x 500mm STRIP
1 – Carbon Fiber Front Spar, 10mm x 1mm x 7.5″ STRIP
4 – Carbon Fiber Trailing Edge spars, 2mm x 500mm ROD
3D printed PETG motor mount
3D printed PETG winglets
Z-bend control rods
Control horns with screws
6′ of 3 mil covering film
NACA 0014 airfoil
Wing Sweep: 12″
Root Chord: 9″
Tip Chord: 6″
Material: #1.3 white EPP foam
Spars: Carbon Fiber
3D parts are PETG