Store

Wind Catcher RC FPVWRA Spec Wing By Wind Catcher RC <p>Are you new to flying a wing or Spec Class?  This wing is for you.  Our intention is to provide a Spec Wing that is durable and flies well.  It is designed to handle crashes well so while you are learning and hit the dirt you have a better chance of getting back in the air in just a few moments.</p><p>The Wind Catcher Spec Wing kit will require assembly.<br /><a href=\"https://windcatcherrc.com/spec-wing/\" target=\"_blank\" rel=\"noopener noreferrer\">BUILD INSTRUCTIONS ARE HERE &lt;— CLICK</a></p><p>You will need to supply your own electronics based on your needs or to meet specifications for <a href=\"https://fpvwra.net/spec-wing-courses-2/\">FPVWRA racing</a>.  Regardless of your build, I recommend metal gear servos, preferably 12 gram.<br />Suggested adhesives are 3M-M77 spray, Gorilla Glue, Starbond CA glue, and Goop or E-6000.</p><p><strong>Provided</strong><br />Left and Right wing halves, #1.3 EPP foam<br />2 – Balsa Elevons<br />2 – Carbon Fiber Main spars, 3mm x 18″ ROD<br />2 – Carbon Fiber Leading Edge spars, 10mm x 1mm x 500mm STRIP<br />1 – Carbon Fiber Front Spar, 10mm x 1mm x 7.5″ STRIP<br />4 – Carbon Fiber Trailing Edge spars, 2mm x 500mm ROD<br />3D printed PETG motor mount<br />3D printed PETG winglets<br />Z-bend control rods<br />Quick connect<br />Control horns with screws<br />6′ of 3 mil covering film</p><p><strong>Specifications<br /></strong>NACA 0014 airfoil<br />Wingspan: 36″<br />Wing Sweep: 12″<br />Root Chord: 9″<br />Tip Chord: 6″<br />Material: #1.3 white EPP foam<br />Spars:  Carbon Fiber<br />3D parts are PETG</p>
$49.99

Home / Shop

FPVWRA Spec Wing By Wind Catcher RC

$49.99
FPVWRA Spec Wing By Wind  Catcher RC
FPVWRA Spec Wing By Wind  Catcher RC

Home / Shop

FPVWRA Spec Wing By Wind Catcher RC

$49.99
Model Number: WCRC-Spec
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
49.990
15 Left in Stock
Manufacturer: Wind Catcher RC
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
MySpace
Digg
Delicious
  • Description

Are you new to flying a wing or Spec Class?  This wing is for you.  Our intention is to provide a Spec Wing that is durable and flies well.  It is designed to handle crashes well so while you are learning and hit the dirt you have a better chance of getting back in the air in just a few moments.

The Wind Catcher Spec Wing kit will require assembly.
BUILD INSTRUCTIONS ARE HERE <— CLICK

You will need to supply your own electronics based on your needs or to meet specifications for FPVWRA racing.  Regardless of your build, I recommend metal gear servos, preferably 12 gram.
Suggested adhesives are 3M-M77 spray, Gorilla Glue, Starbond CA glue, and Goop or E-6000.

Provided
Left and Right wing halves, #1.3 EPP foam
2 – Balsa Elevons
2 – Carbon Fiber Main spars, 3mm x 18″ ROD
2 – Carbon Fiber Leading Edge spars, 10mm x 1mm x 500mm STRIP
1 – Carbon Fiber Front Spar, 10mm x 1mm x 7.5″ STRIP
4 – Carbon Fiber Trailing Edge spars, 2mm x 500mm ROD
3D printed PETG motor mount
3D printed PETG winglets
Z-bend control rods
Quick connect
Control horns with screws
6′ of 3 mil covering film

Specifications
NACA 0014 airfoil
Wingspan: 36″
Wing Sweep: 12″
Root Chord: 9″
Tip Chord: 6″
Material: #1.3 white EPP foam
Spars:  Carbon Fiber
3D parts are PETG

The FPVWRA is a startup organization with the intention to organize and promote FPV Wing racing in a safe and orderly fashion. The FPVWRA is made up of an assembly of FPV pilots. Some are racers, some are organizers. All are obsessed with FPV wings.